CHUCK-EEZ Description Applications Benefits Typical Specifications Utilization Recommendations Stocking Distributors —— SPECIALTY Lubricants LUBRICANTS home page		CHUCK-EEZ ® Application Recommendations Here are a few application tips to help you get the highest level of performance from CHUCK-EEZ. Application methods: Hand grease guns Pneumatic grease equipment CHUCK-EEZ may also be applied down to -20° F using a brush with stiff bristles or by burnishing in with a clean cloth. Using CHUCK-EEZ Grease each chuck twice for every eight-hour shift, especially if a lot of coolant is used. Two shots of CHUCK-EEZ is enough since the guideways cannot hold much grease. Every two weeks, tear down each chuck to clean and re-grease. (You may wish to maintain a second backup chuck to keep your machine running while performing maintenance.) As cycle times become longer (1.5+ minutes), greasing may only be required once in every eight-hour shift. Hydraulic Pressure (Based on KITAGAWA F1236H00 Cylinder) Based on 1.250" high soft jaws, proper pressure is approximately 308 psi. As jaws become taller, pressure should be reduced to approximately 50% of this value. NOTE: This is a general guideline and should be checked against the chuck manufacturer's documentation. Summary By using CHUCK-EEZ according to the above recommendations, you should experience longer chuck life while keeping within the manufacturer's specifications.
		Copyright 1999, 2000, 2001 SPECIALTY LUBRICANTS CORPORATION 8300 Corporate Park Dr., Macedonia, OH 44056 (330) 425-2567 All rights reserved.